ROX 12.0 SPORT

Product Support

Here you can find information about your product. In the “Service” tab you will find FAQs and operating instructions. In the “Accessories” tab you will find compatible accessories for your product.

Servizio

Tutorial videos
- ROX 12.0 SPORT VIDEOS
  
  > CLICK TO OPEN THE VIDEO PLAYLIST.

MANUALE OPERATIVO
- OPERATION MANUAL ROX 12.0
  
  > CLICK TO OPEN THE PDF FILE.

FAQ
- Which min./max. wheel circumference can be set as value?
  
  Wheel circumference min. 500 mm
  
  Wheel circumference max. 3999 mm
  
  With the ROX 12.0 GPS, even an input less than 500 mm can be adjusted.
- What is the maximum speed that the bike computer can display?
  
  The speed is displayed up to 199.8 km/h with a wheel circumference set at 2,095 mm.
- Che diritto di garanzia ho?
  
  I reclami in garanzia possono essere fatti in caso di errori di materiale e di fabbricazione. Sono escluse dalla garanzia le batterie, le cinghie elastiche, le cinghie pettorali in tessuto, ad es. Comfortex, parti soggette a usura e usura per uso commerciale o incidenti. Se non viene visualizzata alcuna velocità, ciò può essere dovuto al trasmettitore o al computer.
- Come posso ottenere una sostituzione?
  
  Gli accessori sono disponibili nel SIGMA Webshop.
- How do you update the firmware of the ROX 12.0 SPORT regarding the use of training peaks?
  
  Proceed as follows to update the firmware of the ROX 12.0 SPORT regarding the use of interfaces for training peaks:
  
  – Please connect your ROX 12.0 SPORT to your computer using a USB cable.
  – Open this as a mass storage device, e.g. in Windows Explorer or Apple Finder
  – Please drag (DO NOT unzip) the firmware file (that you downloaded here) into the following directory ‘System Files/ data/ settings’.
  – When the file is transferred, please disconnect the USB connection.
  – Then carry out the update on the ROX 12.0 SPORT. Now the upload to training peaks should work again.
  
  Download firmware file
- Is the ROX 12.0 SPORT compatible with the ROX 10.0 GPS and ROX GPS 11.0 sensors?
  
  The systems are based on the ANT + standard, therefore the sensors of the ROX 10.0 GPS and ROX GPS 11.0 can be connected to the ROX 12.0 SPORT.
- Are ANT + sensors from other manufacturers compatible with the ROX 12.0 SPORT?
  
  ANT + sensors from other manufacturers can be connected to the ROX 12.0.
- How do I update the firmware version of ROX 12.0 SPORT?
  
  To perform a firmware update, please proceed as follows:
  
  1. Start your ROX 12.0 SPORT
  2. Make sure that you are connected to a Wifi network
  3. Connect your ROX 12.0 SPORT to a power adapter using the micro USB cable
  4. Now wait a few minutes for the update to load in the background (an arrow appears next to the time display)
  5. Confirm the message “New software update available” with the green button “Now”
  6. Then wait until the installation has been completed and the ROX 12.0 SPORT is restarted
- How can I save a route as a track?
  
  To do this, select: “My Activities” -> “Select one” -> “Options (start as track)” -> “Options” -> “Save as Track”.
- Are sensors necessary to use the ROX 12.0 SPORT?
  
  The ROX12.0 SPORT calculates the current speed using GPS. Alternatively, an ANT+ speed transmitter can be used for this purpose. Moreover, it is possible to link an ANT+ heart rate transmitter and an ANT+ cadence transmitter.
- Which brackets can be used?
  
  In addition to SIGMA’s own brackets, third-party brackets marked “K-EDGE” can also be used.
- Which SIGMA brackets are compatible with ROX 12.0 Sport?
  
  The brackets ROX 11.0 GPS, ROX 7.0 GPS and Pure GPS are compatible with the ROX12.0 SPORT.
- Which data are synchronised via the SIGMA CLOUD?
  
  The SIGMA CLOUD transfers your activities, sports profiles, tracks and device settings.
- Are the maps on the ROX 12.0 SPORT expandable?
  
  Maps of the following countries can be expanded: Africa, Asia, Europe, North America, Oceania and South America. External third-party maps are not expandable.
- Can the map orientation be also aligned in the direction of travel?
  
  Yes, please open the settings -> “Map” -> “Map Orientation”
- Can I use the services like GPSies on the way?
  
  Since the use of GPSies is only possible online, you need access to a guest Wi-Fi or a hotspot.
- How can I transfer tracks to the ROX 12.0 SPORT?
  
  Drag the tracks you want to transfer from the removable medium to the Tracks folder. You can also transfer tracks via the SIGMA DATA CENTER to your ROX 12.0 SPORT.
- Can I turn off the device while riding?
  
  The display can be switched off while driving. Navigation and turn-by-turn instructions are still active. A complete switch off is not possible.
- Can I use a Powerbank to charge the ROX 12.0 SPORT?
  
  Yes, but note that it has 5V and 1A.
- What does the message "Distance longer than 300 kilometres" mean?
  
  The distance to the destination is further away than 300 kilometres.
- Why are no watt values shown?
  
  To display watts values, a power meter is necessary.
- How long can the WiFi password be?
  
  The maximum length of your password may be 25 characters. The following special characters cannot be used: “\ |”
- How much does it cost to use the SIGMA LINK app and the SIGMA DATA CENTER software?
  
  The use of both programmes is free of charge.
  The SIGMA LINK app can be downloaded from the Google Play Store and the IOS App Store.
  The SIGMA DATA CENTER can also be downloaded free of charge at www.sigma-download.com.
- Can I use any microSD card with my ROX 12.0?
  
  In general, every microSD card is compatible with the ROX 12.0. Since there are great differences in quality, some mircoSD cards can cause problems. We have created a list of microSD cards that we have tested.
  
  IMPORTANT: To ensure the proper functioning of the microSD card, it must first be formatted as FAT32 (NTFS or exFAT is not recognised by the ROX12)!
  When using “slow” memory cards and memory cards larger than 32 GB, the starting time of the ROX 12.0 is extended!
  
  – AGFA microSDHC 4 GB
  – Kingston microSDHC 8 GB, Class 4
  – Lxsino 32GB 32G Ultra microSDHC, Class 10
  – Samsung EVO Plus microSDHC 32 GB, up to 95 MB/s, Class 10 U1 memory card
  – Samsung EVO SDHC 32 GB, Class 10 U1
  – SanDisk Ultra 16 GB microSDHC memory card, Class 10 U1, A1, FFP
  – SanDisk Ultra 32 GB microSDHC, Class 10 U1, A1
  – SanDisk Ultra 64 GB microSDHC, Class 10 U1, A1
  – Transcend TS16GUSDCU1, Class 10 Premium microSDHC 16 GB memory card UHS-I
  – Transcend, Class 10 Premium microSDHC 32 GB memory card UHS-I
  – TPSON 32 GB microSD card, microSDHC memory card, Class 10 UHS-I
  – Verbatim 8Gb Adapter, Class 10
  
  PS: We will test more cards and add them to the list!
- How do I connect/pair the ANT + transmitter with my device?
  
  All information about Ant + pairing can be found in our video tutorial: http://sigma-qr.com/bike-computer.html
- ROX 12.0 SPORT - Factory Reset
  
  Please proceed as described below to reset the ROX 12.0 SPORT to the factory settings:
  
  – Press and hold the On / Off button at the same time as the Home button until you see the “Recovery Mode” display
  – Now open the menu by pressing the Home button
  – Now use the Plus / Minus button to navigate to the “wipe data/factory reset” entry and confirm this with the On / Off button
  – Now select the entry “Yes–delete all user data” and then restart the system.
- ROX 12.0 SPORT - How can I carry out a battery calibration?
  
  Please proceed as described below to recalibrate the battery of your ROX 12.0 SPORT:
  – Start your ROX 12.0 SPORT
  – Start a training session
  – Wait until the ROX 12.0 SPORT switches off completely
  – Repeat the above procedures until the ROX 12.0 SPORT can no longer be started
  – Fully charge the ROX 12.0 SPORT again
- ROX - Can I remove the battery?
  
  Since ROX bike computers have fully sealed rechargeable batteries to meet IPX7 waterproof specifications, removing the battery may affect water resistance and void the warranty The battery cannot be replaced. At the end of the battery life, the entire device must be replaced.